Publications

Books:

Wilson K. S. Chiu, Ilya Avdeev, Michael W. Ellis, Partha P. Mukherjee and George J. Nelson “Electrochemical Energy Conversion and Storage: From Fundamentals to Technologies,” – expected to be published, August 2015 (Wiley).

Book Chapters:

  1. “Dynamic Radiography Imaging as a Tool in the Design and Validation of a Novel Intelligent Amputee Socket,” George Papaioannou, Dimitris Tsiokos, Goeran Fiedler, Christos Mitrogiannis, Ilya Avdeev, Jake Wood, and Ray McKinney in Computational Vision and Medical Image Processing: Recent Trends, pp. 91-112, Springer, 2010.
  2. “Tribological and Mechanical Design Considerations for Wave Energy Collecting Devices,” Andrew Fronek, Michael Nosonovsky, Ben Barger and Ilya Avdeev in Green Tribology: Green Energy and Technology, pp. 607-619, Springer, 2012.

Journal Papers:

  1. I. Avdeev and M. Shams, “Vascular stents: Coupling full 3-D with reduced-order structural models,” 2010 IOP Conf. Ser.: Mater. Sci. Eng. 10 (DOI: 10.1088/1757-899X/10/1/012133).
  2. I. Avdeev, K. Sobolev, A. Amirjanov and A. Hastert, “Micromechanical Models of Structural Behavior of Concrete,” 2010 MRS Proceedings Library, Vol. 1276
    (DOI: 10.1557/PROC-1276-20).
  3. R. Amano, I. Avdeev, R. Malloy and M. Z. Shams, “Power Performance Test on Different Design of Wind Turbine Rotor Blade,” International Journal of Sustainable Energy, iFirst 2011, 1-18. DOI: 10.1080/14786451.2011.599491.
  4. P.L. Menezes, M.R. Lovell, I.V. Avdeev, J.-S. Lin and C.F. Higgs III, “Studies on the Formation of Discontinuous Chip during Rock Cutting Using an Explicit Finite Element Model,” International Journal of Advanced Manufacturing Technology (2014), 70:635-648.
  5. I. Avdeev, M. Martinsen and A. Francis, “Rate- and Temperature-Dependent Experimental Characterization of a Multilayer Polymer Separator,” Journal of Materials Engineering and Performance (2014), 23:315-325.
  6. P.L. Menezes, M.R. Lovell, I.V. Avdeev, J.-S. Lin and C.F. Higgs III, “An Explicit Finite Element Model to Study the Influence of Rake Angle on the Discontinuous Chip Formation during Orthogonal Metal Cutting,” International Journal of Advanced Manufacturing Technology (in press).
  7. P.L. Menezes, M.R. Lovell, I.V. Avdeev and C.F. Higgs III, “Studies on the Formation of Discontinuous Rock Fragments during Cutting Operation,” The International Journal of Advanced Manufacturing Technology (2014), 73(5):875-885.
  8. I. Avdeev and M. Gilaki, “Numerical Analysis and Experimental Characterization of Cylindrical Lithium-Ion Battery Cells Subject to Lateral Impact,” Journal of Power Sources (2014), 271:382-391.
  9. I. Avdeev, A. Francis, J. Hamann and S. Ananthasivan, “Accurate Characterization of Torsional Stiffness of Flexible Disc Couplings,” Journal of Engineering for Gas Turbines and Power (accepted for publication).
  10. P.L. Menezes, I.V. Avdeev, M.R. Lovell and C.F. Higgs III, “An Explicit Finite Element Model to Study the Influence of Rake Angle and Friction during Orthogonal Metal Cutting,” Journal of Materials Engineering and Performance (submitted for review).
  11. I. Avdeev and P. Doval, “Numerical Analysis of Aerodynamic Drag Reduction in Cycling Through Full-Body 3-D Scanning,” Progress in CFD, International Journal (submitted for review).

Conference Proceedings/Abstracts:

  1. I. Avdeev and M. Lovell “On Modeling Electric Fields for Microscale Cell Manipulation,” Proceedings of 9th International Conference on Information Technology and Applications in Biomedicine (ITAB-2009), November 4-7, 2009, Larnaca, Cyprus (10.1109/ITAB.2009.5394383).
  2. M.Z. Shams and I.V. Avdeev “Modeling Vascular Stents: Coupling Solid with Reduced Order FE Models,” Proceedings of WCCM/APCOM 2010, July 19-23, 2010, Sydney, Australia.
  3. R. Amano, I. Avdeev, R. Malloy and M.Z. Shams “Power Performance Tests on a Different Wind Rotor Blade Design,” Proceedings of ASME 2010 Power Conference, July 13-15, 2010, Chicago, pp. 617-627 (doi:10.1115/POWER2010-27168)
  4. M. Shams, A. Hastert and I. Avdeev “Motion Tracking and Mechanical Analysis of Peripheral Vascular Stents,” Proceedings of The Eighth IASTED International Conference on Biomedical Engineering, February 16-18, 2011, Innsbruck, Austria.
  5. I. Avdeev, M. Shams, A. Hastert and A. Scudder, “Photogrammetric Tracking of Stent Deformations,” Abstracts of the 11th U.S. National Congress on Computational Mechanics, July 25-28, 2011, Minneapolis, Minnesota, USA.
  6. I. Avdeev, A. Scudder, M. Shams and A. Hastert, “Thermoelectric Fracture Detection in Bare Metal Stents,” Abstracts of ASME 2011 Applied Mechanics and Materials Conference, May 30 – June 1, 2011, Chicago, Illinois, USA.
  7. I. Avdeev, M. Shams, A. Hastert and A. Scudder, “Photogrammetry Driven Finite Element Analysis of Vascular Implants,” Abstracts ASME 2011 Applied Mechanics and Materials Conference, May 30 – June 1, 2011, Chicago, Illinois, USA.
  8. I. Avdeev and A. Scudder “Infrared Fracture Detection of Bare Metal Stents,” Abstracts of WCCM 2012, 8-13 July, 2012, Sao Paulo, Brazil.
  9. I. Avdeev and M. Gilaki “Explicit Dynamic Simulation of Impact in Cylindrical Lithium-Ion Cells,” Proceedings of ASME/IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  10. I. Avdeev and P. Doval “Coupled-Physics Modeling of Lithium-ion Battery Cylindrical Cell Microstructure,” Proceedings of ASME/IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  11. I. Avdeev, M. Martinsen and A. Francis “Materials Testing of Lithium Ion Battery Components for Use in Finite Element Analysis,” Proceedings of ASME/IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  12. I. Avdeev and P. Doval “Investigation of Riding Position Effects on Time-Trial Bicycle Drag Coefficient at Different Yaw Angles,” Proceedings of ASME/IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  13. I. Avdeev, M. Shams and A. Hastert “Stress Analysis of Peripheral Stents Using Photogrammetric Deformation Tracking,” Proceedings of ASME/IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  14. I. Avdeev, N. Stern and B. Thompson “Changing Entrepreneurial Culture of Southeastern Wisconsin: From E-Team Network to Student Startup Challenge,” Proceedings of Open 2013: NCIIA’s 17th Annual Conference, March 22-23, 2013, Washington, DC, USA.
  15. A. Francis and I. Avdeev “Sensitivity of Mechanical Properties to Print Parameters in FDM Fabricated Parts,” Abstracts ASME/IMECE2013, November 15-21, 2013, San Diego, California, USA.
  16. I. Avdeev, M. Martinsen and A. Francis “Mechanical Characterization and Constitutive Modeling of Polymer Separators,” Abstracts ASME/IMECE2013, November 15-21, 2013, San Diego, California, USA.
  17. I. Avdeev and M. Gilaki “Modeling Longitudinal and Transverse Impact in Cylindrical Battery Cells,” Abstracts ASME/IMECE2013, November 15-21, 2013, San Diego, California, USA.
  18. M. Shams, I. Avdeev, A. Amirjanov, K. Sobolevand A. Hastert “Modeling Mechanical Response of Concrete Designed with Multiscale Packing Algorithm,” Abstracts ASME/IMECE2013, November 15-21, 2013, San Diego, California, USA.
  19. I. Avdeev. M. Martinsen and A. Francis “Modeling Multilayer Polymer Battery Separator’s Structural Response,” Battery Congress, June 11-12, 2014, Troy, Michigan. USA.
  20. M. Gilaki and I. Avdeev “Structural Homogenization in Energy Storage Systems,” 11th World Congress on Computational Mechanics, July 20-25, 2014, Barcelona, Spain.
  21. A. Francis and I. Avdeev “Model Order Reduction for Design of Torsional Disk Couplings,” ASME/IMECE2014, November 14-20, 2014, Montreal, Canada.
  22. M. Gilaki and I. Avdeev “Comparing High-Performance Computing Techniques for Modeling Structural Impact on Battery Cells,” Abstract accepted ASME/IMECE2014, November 14-20, 2014, Montreal, Canada.